SV-Administration-Management

Management

• Router Password - Change the password used to administer the router
• Bandwidth Management - Enable and configure Bandwitdh Management
• Boot Wait - Enable or disable the boot wait feature
• Cron - Enable and configure the cron daemon
• DHCPd - Enable or disable the DHCP daemon and set static DHCP entries
• DNS Masq - Enable or disable the DNS server
• Firewall - Enable or disable the system's firewall
• NAS
• NTP Client - Enable or disable the NTP daemon
• PPP
• PPTP - Enable and configure the built in PPTP server
• Reset Button - Enable or disable the Reset Button daemon
• Routing - Configure advanced routing options
• SSHD - Enable and configure SSH access to the router
• Syslogd - Enable the syslog daemon
• Telnet - Enable or disable telnet access to the router
• Tftpd - Enable or disable the tftp daemon used to upload new firmware images
• UPnP - Enable or disable the UPnP features on the router

"The Enable/Disable flags under Administration->Management are designed to be the "master switches" in the system. If you disable anything here it is disabled everywhere." The following was made in regards to the Satori pre3.3 and earlier builds. It may have been implemented in later builds. "I will be moving the few odd parameter settings out of the Enable/Disable area so they will be pure, system-wide off/on settings for the major services." Quoted from Sveasoft on March 28, 2004. Reference: http://www.sveasoft.com/modules/phpBB2/viewtopic.php?t=1033

---